Used cooking oil or recycled vegetable oil, waste vegetable oil, wvo, is used to make biodiesel bio fuel, Nazco is a  supplier of used cooking oil and biodiesel processors to make biodiesel fuel; B100, B99, B20, as an  an alternative diesel produced from natural and renewable energy sources. Biodiesel PME, SME is also produced from bulk vegetable oil e.g crude soybean oil, soy acid oil, crude palm oil, palm acid oil, jatropha oil, cottonseed oil, refined sunflower oil, crude rapeseed oil and other raw and organic materials. Nazco is supplies bio diesel feedstock for alternative energy;  and biodiesel production equipments, e.g biodiesel processors.

Biodiesel Processor: Click Link below for info: Biodiesel Processor W/ Dewatering centrifuge rebuilt, filtration Esterification system using solid catalyst and post Esterification flash evaporation. Designed to operate at a flow rate of 2 GPM using dry oil up to 5% FFA. Includes 1ea. 200 gallon stainless resin tanks. GF101 resin, Methanol pump, oil pump, heat exchanger, flash evaporator condenser. Dewatering centrifuge rebuilt, filtration and heat exchangers. 4ft X 8ft platform with liquid containment. 2ea 500,000 BTU hot water boiler natural gas fired 1.2 million gallon per year biodiesel processor. Continuous flow system includes: 3 ea 1000watt sonication units and flow cells 5 each Cat stainless steel plunger pumps with explosion proof motors 5 each VFD’s for pumps Electrical cabinet Nitrogen purged electrical system 6 inch distillation column system 2 each stainless steel flash evaporators with condensers Glycerol decanting tank Stainless steel methanol recovery tank SE05-BDX centrifuge (rebuilt) with valves, and vfd’s Vacuum pump system for methanol recovery Stainless steel heat exchangers for system process heat transfer 2 each 200 gallon stainless steel resin tanks with GF202 resin Methanol condensing system chiller and cold trap. Steel process equipment platform for all above process equipment. Includes gas chromatograph and testing equipment for feedstock and finished product. System output is based on 2 GPM output 24/7/350 per year. Fuel will meet ASTM 6751-07A based on virgin soybean oil feedstock. Setup at location does not include electrical service connections or boiler connections. Or any other changes that need to be made to your facility to accommodate this equipment. We will setup and train your employee’s on system operation. All parts warranted for 12 months from startup date at your location; contact us for more info and RFQ.